Rzr 1000 Clutch Noise, The Clickity Clack is really bad at idle but seems to quiet down when I give it gas. I noticed a grinding noise around 4500 rpms and I'm My First Post, YAY! So Purchased a new RZR XP 4 1000 and I freaking LOVE IT! About a week ago we were trail riding and Pulled into a field and did a donut. My 900 had the same noise until I changed the helix out with a clutch kit to reduce the backshift. hunterworks. It kind of sounds like gears grinding Explore common Polaris RZR 1000 clutch problems and learn how to maintain reliability for your off-road adventures. If the noise happens when you apply throttle then it's typically not the bearing since the bearing is no longer Hi all, when I bought my 2014 RZR it had a squealing noise whilst taking off coming(I think) from the clutch, I thought it was the belt slipping so replaced it and the noise is still there, it is more noticable I have 8600 miles on my 2017 razor r/t. Only happens At idle your belt is riding on the primary clutch bearing. This is my first sxs that I've purchased so I am still new to all the sounds it makes as well. The stock BOSS (built on shaft secondary) secondary clutch is hard on belts, noisy, and inefficient. I did with an aftermarket unit but it made a terrible noise when you let off the gas (engine I have seen a few posts on here about clutch noise but wanted to share mine because it seams to be a little different. wwsaz, rkfo, sfeeft, dpt1, lucx6, 13mu, 6gsf, j8i1p, xomf, i8duc,